wood veneer wall panel

wood veneer wall panel

PRODUCT FEATURES

COMMENTS

How to Install wood veneer wall panel?

1. The bottom layer of the confimation and clean the bottom to be fully dry,so that the bottom level.Remove dirt and rubbish.The bottom layer,please use the gypsum board or the magnesium plate and the surface smooth and waterproof material plate.

2. Marking and Positioning In accordance with the size of the decoration,the shape of the bottom line,positioning.

3. Double side tape adhesive bonding tape at the tixed position,hard pressed to make its cement. Usage:the wall is about 3.3/m2 of the ceiling is about 4.3/m2.

4. Adhesive glue Cut the hose glue bottle mouth,leaving the cigarette weight(about 7mm) the width of the exit,and then squeeze the glue,(tape beside the position in the adhesive glue into a wire bound usage on the wall about 0.5 A/m2 the ceiling about 0.6A/m2.

5. Double sided adhesive tape for the removal of the adhesive tape Stripping,remove the Separation of paper.

6. In 10 minutes after the bonding of the decorative plate,the decoration plate is bonded to the fixed position.The position of the hands to press the tape,to make it fully bonded.Please note that you can not move or re-bond.

7. Maintenace of 1 days during the course of the adhesive glue.

wood veneer wall panel is ideal replacement for conventional wall systems, the advance include:
--Lightweight, easy to transport
--Highly resistant to moisture and mold
--Easy to maintenance, quick and easy to install
--Waterproof, fire resistance,
--Vivid range of colors and design